MC-1044 MC-1044H MC-2, MC-2H MC-2Q	The model MC-2 has long been known as the workhorse of small bulk plant installations. The model MC-2 has 2-1/2" NPT tapped inlet ports and is reversible. It is suitable for loading delivery trucks at a rate of 45-50 GPM. Fills up to five 100 lb. cylinders on a manifold in 4 minutes. Can be fitted with steel flanges, 2" threaded or weld type.   The model MC-2H is identical to the model MC-2 except the MC-2H has the same capacity of the MC-2 but at lower drive speeds. At 1500 RPM motor speed, the MC-2H will deliver the same as the MC-2 at 1800 RPM. This makes the MC-2H ideal for overseas, 50 cycle current where maximum motor speed is 1500 RPM.   PUMP SPECIFICATIONS PUMPS ONLY AVERAGE DELIVERY RATE GPM MAXIMUM DIFFERENTIAL PRESSURE INLET/OUTLET SIZE: FEMALE THREADED MOTOR PUMP ROTATION AS LOOKING AT PUMP SHAFT-END MODEL 40 PSID, 1800 RPM 75 PSID, 1800 RPM PSI INCHES H.P. MC-2 42 35 125 2-1/2 3 H.P. TO 40 PSID 5 H.P. OVER 75 PSID REVERSIBLE MC-2H 42 @1500 RPM 35 @1500 RPM 125 2-1/2 3 H.P. TO 40 PSID 5 H.P. OVER 75 PSID REVERSIBLE